HMI & SCADA Sontheim

eControl mIO with OPC UA

Pinterest LinkedIn Tumblr

Equipped with a variety of interfaces, the HMI with 10.1″ touch display can be used for a wide range of automation applications. An integrated motion sensor makes it an energy miracle.

Features and display

The IMX6 Quad Core processor has a 1 GB working memory and the possibility to expand the memory with an SD card slot. With the help of the resistive touch screen, data can be intuitively visualized and software components operated. The modular econtrol mIO xt is therefore ideally suited as an HMI for machine control.

Variety of interfaces

The HMI is equipped with a number of interfaces. In addition to a motion sensor, the controller has two CAN, Ethernet and USB connections each and up to six temperature sensor inputs. An interface board carries the digital inputs and outputs, as well as the majority of analog interfaces. All connectors are accessible from the rear panel.

Unbeatable team: MDT 2.0 integration

On the HMI, the Modular Diagnostic Toolchain can be integrated with OPC UA, creating the perfect state-of-the-art solution for your Industry 4.0 applications. The new MDT® 2.0 provides a standardized tool to access data of the machine. It enables the standardization of data description (ODX), programming (OTX) and data sharing & provision (OPC UA). It is the perfect basis for innovative machine park monitoring. Combined with the HMI, Sontheim creates the all-round package: smooth machine control, standardized diagnostics and simple cloud connection.

Motion sensor

A motion sensor is integrated as part of the front panel. The pyroelectric sensor, or PIR sensor for short (Passive Infraed Sensor), reacts to motion and turns on the display and backlight as soon as motion is registered. This function is used to turn off the display and backlight when the device is not being operated and saves energy.

Add

Comments are closed.