Home » DIADesigner-AX v2.2.0 Manual: Delta’s IEC 61131-3 Software at a Glance

DIADesigner-AX v2.2.0 Manual: Delta’s IEC 61131-3 Software at a Glance

3 views
DIADesigner-AX v2.2.0 software manual from Delta Electronics

Delta Electronics‘ DIADesigner-AX is the IEC 61131-3 programming and configuration environment for its AX motion and logic PLC range, servo drives, AC drives, remote I/O and safety controllers. The 445-page manual (version 2.2.0, dated 30 October 2026) is organised in nine chapters. Below is a summary of each one.

Chapter 1 – Key features and supported devices

  • All IEC 61131-3 editors (FBD, LD, ST, SFC), reusable libraries, wizards, input assistance and extensive online debugging.
  • Two built-in configurations: Hardware Configuration and Network Configuration.
  • Motion control: PLCopen MC function blocks, G-code editor, E-CAM editor, positioning planning chart, virtual and logical axes, and integrated CANopen and EtherCAT drivers. See also Delta’s AX-308E CODESYS-based motion controller.
  • Supported devices: AX-3, AX-5 and AX-8 motion PLCs, AX-C series, logic PLCs, the AX500SC00-0S safety controller, C2000 plus / MS300 / MH300 / CH2000 / MX300-E AC drives, ASDA servo drives (see the ASDA-A2 discontinuation notice), and EtherCAT, PROFINET and EtherNet/IP couplers and remote I/O.

Chapter 2 – Installation

  • Installed, updated and uninstalled through DIAInstaller (available at diastudio.deltaww.com; see also our guide to downloading and using DIAInstaller).
  • Requirements: Windows 10/11 64-bit, Microsoft .NET Framework 4.8, minimum 16 GB RAM (32 GB recommended), 8 GB free disk (compact) or 17 GB (full installation), 1920 x 1080 display.

Chapter 3 – Getting started

  • A step-by-step first project: create the project, add a device, set up communication, declare variables, program, download and run, and share HMI tags.
  • Project management: Add Device dialog, toolbar, device update, I/O mapping, project settings, source-code upload/download and multi-user engineering.

Chapter 4 – Programming reference

  • IEC 61131-3 languages: Delta ToolBox, Ladder Diagram (including the new Execute box) and Sequential Function Chart (new in this version).
  • Working with variables: array notes, variable export and import, smart input and auto-completion.
  • Robotics project support.

Chapter 5 – Hardware configuration

  • Communication hardware: extension and network modules, function cards, remote I/O and IO-Link devices.
  • Specialised and system hardware: motion control modules, R3-C load cell modules, power supply modules and current consumption calculation.
  • Controller settings: system settings (including the new Persistent Retain backup), parameters, device diagnosis and high-speed I/O.
  • Motion devices: synchronous, positioning and velocity axes, virtual drives, free encoders, axis groups, non-Delta axes, homing reference and SoftMotion version compatibility.
  • Safety controller: EtherCAT safety controller, safety application, operation, and safety modules for servo drives (with new watchdog value validation).

Chapter 6 – Network configuration

  • Connecting to the controller via network or USB cable and communication settings.
  • Protocols: Modbus COM and TCP, EtherCAT, EtherNet/IP, PROFINET I/O and OPC UA.
  • Network topology set-up and EtherCAT topology diagnosis.

Chapter 7 – HMI interaction

  • Exporting variables from DIADesigner-AX and importing tags into DIAScreen (DOP-100 and AX-8 series models).
  • Upload and download between the PLC and the HMI.

Chapter 8 – Tools and configurations

  • Options (including the new Secured options and licence usage metrics), Cloud Asset Manager (new download, install and uninstall functions), Device Repository, Library Manager, Firmware Update and Package Manager.
  • Startup Command, Resource Monitor (variable usage and controller CPU load), Trace Variables, Software Diagnosis and Audit Log.

Chapter 9 – Protection mechanism

  • Project ID and PLC ID: set, modify and clear them, separately or together.
  • Access rights, import/export of management files, users and groups, user and password management, and permission management.

What is new in version 2.2.0

  • Execute box in Ladder Diagram and the Sequential Function Chart section.
  • Persistent Retain Settings with a Backup function.
  • R3-C02LC10-0A load cell module and watchdog value validation for safety controllers.
  • Show licence usage metrics, Secured options and new Cloud Asset Manager sections.
  • Updated supported devices and system requirements.

Full manual

Related News