Home » AX Series Motion Controller Instructions Manual v2.2.0: Delta Motion Instructions

AX Series Motion Controller Instructions Manual v2.2.0: Delta Motion Instructions

1 views
AX Series motion controller instructions manual v2.2.0 from Delta Electronics

This 845-page Delta Electronics manual (version 2.2.0, 30 October 2026) is the instruction reference for motion control programming on the AX series, written for use with DIADesigner-AX. It covers three chapters; here is what each one contains. For hardware and project set-up, see our DIAInstaller guide and the AX-308E CODESYS-based motion controller article.

Chapter 1 – Introduction to motion control

  • Basics of motion control instructions and user unit configuration.
  • Descriptions of the motion control instructions and an overview of the Delta motion instructions library versions.
  • Device categories and PDO mapping.
  • Hardware limit reverse movement function (new): functional workflow and parameter settings.

Chapter 2 – Motion control instructions

  • SM3 Basic – motion control and administrative instructions.
  • DL_MotionControl and DL_MotionControlLight – Delta motion libraries, including positioning axis, velocity axis and tension control instructions.
  • DL_ServoPress_AX – servo press instruction.
  • DL_PLCopenPart3 – PLCopen Part 3 motion and administrative instructions.
  • DL_RotaryCut – rotary cutting instructions.
  • Tension control – servo configuration, closed-loop speed control and diameter calculation (INT and SR versions).

Chapter 3 – Appendix

  • Instruction tables and indexes: by function, by device and alphabetical.
  • Data types: enumerations and structures.
  • Error codes and troubleshooting for synchronous axes, positioning axes and the SM3_Drive_ETC library (for EtherCAT drives).
  • Explanation of DMC_Home_P.

What is new in version 2.2.0

  • Hardware limit reverse movement function added in Section 1.6, with its workflow and parameters.

Full manual

Related News