Contrinex has launched the Smart Nut Detection sensor, a device that checks weld nuts without interrupting production. As a result, metalworking companies save time and reduce scrap. The sensor will make its first public appearance at SPS 2026 in Nuremberg.
How the Smart Nut Detection sensor works
The sensor offers two preconfigured thresholds and comes in a coated stainless-steel housing. A M12 thread with a 4 mm pin integrates it into the application, and the pin acts as the test probe. Moreover, the detection can point toward the edge of the housing. Therefore, the sensor reliably detects even push-on weld nuts.
Stainless-steel sleeves extend the range of nut sizes. Four screw-on sleeves are available as centering aids for larger nuts (M8, M10 and M12). Both the sensor and the sleeves carry a ceramic coating that repels weld spatter. This coating protects the sensor and also carries away the heat that builds up there.
Key features
- Two preconfigured thresholds, sufficient for most applications
- Coated stainless-steel housing with M12 thread and 4 mm test pin
- Four screw-on stainless-steel centering sleeves for M8, M10 and M12 nuts
- Ceramic, spatter-repellent coating on the sensor and the sleeves
- Detection oriented toward the housing edge for push-on weld nuts
- No new teach-in after fitting a stainless-steel sleeve
- Teach commands over IO-Link to adapt the switching points
Configuration and integration
The preset thresholds cover most cases. Nevertheless, engineers can adapt the switching points through IO-Link teach commands. Two options exist. The first is the PocketCodr handheld configurator, which needs no programming skills. The second is a standard PLC.
The housing detects through stainless steel without interference. For this reason, the sensor keeps its settings after you screw on a stainless-steel sleeve.
Why it matters for engineers
Missing weld nuts cause scrap and stoppages in sheet-metal production. A fast in-line check helps to catch these faults early. In addition, the sensor belongs to the family of inductive smart full-metal sensors from Contrinex. Like the others, it supports predictive maintenance. In IO-Link mode, it sends binary output signals straight to the controller, so teams can react almost without delay.
Availability and SPS 2026
Contrinex will present the sensor from 24 to 26 November at SPS in Nuremberg, in Hall 7A at Stand 430. You can find more details on the Contrinex Smart Nut Detection product page. Read more news in our Contrinex section, in our SPS news, or see the new Contrinex 3D Smart Camera.
