Studio 5000 Logix Designer is the programming software for Rockwell Automation’s Logix 5000 controllers. It replaces RSLogix 5000 and covers ControlLogix, GuardLogix, CompactLogix and Compact GuardLogix. This guide explains the current versions, the PC requirements for version 38.02 and the official way to download and activate the software.
What is Studio 5000 Logix Designer?
Studio 5000 is Rockwell’s engineering and design environment. Logix Designer is its controller programming application. You write ladder logic, function block diagrams, structured text and sequential function charts in one tag-based project. The application also includes simulation and online diagnostics tools.
Rockwell also sells a Professional edition that adds the Logix Designer SDK for automated engineering tasks. In addition, Studio 5000 Logix Emulate lets you test code on a PC before you touch real hardware. If you are new to the platform, our modular programming tips for Studio 5000 show how to structure a clean project.
Versions: which release should you use?
Rockwell released version 37.00 in January 2025 and version 38.00 in September 2025. Releases 38.01 and 38.02 followed. The newest release is not always the right one, however. Logix 5000 controllers must run firmware that is compatible with the Logix Designer version you use.
Therefore, start from the controller and not from the software. Check the firmware revision first. Then pick the Logix Designer version that supports it. Rockwell’s Product Compatibility and Download Center (PCDC) shows these pairs for each catalog number.
PC requirements for version 38.02
The release notes for version 38.02 list the following requirements. Requirements change between versions, so always read the notes for the release you install.
| Item | Requirement |
|---|---|
| Processor | Minimum 4 logical cores; 8 logical cores recommended |
| Memory | Minimum 8 GB RAM; 16 GB recommended |
| Free disk space | 30 GB minimum |
| Operating system | 64-bit only; no 32-bit support |
| Supported systems | Windows 11 Professional and Enterprise (24H2 and later), Windows 11 LTSC editions, selected Windows 10 LTSC editions, Windows Server 2019, 2022 and 2025 |
| Preferred systems | Windows 11 Enterprise 2024 LTSC and Windows Server 2022 Standard |
| Display | 2K or 4K screens work with scaling up to 125 percent |
| Prerequisites | .NET Framework 4.8, FactoryTalk Services Platform v6.60, FactoryTalk Activation Manager v5.02, FactoryTalk Linx v6.60 |
Rockwell tests its preferred operating systems first, and it qualifies patches on them first. For this reason, choose one of them for a production engineering laptop. You can install the software on other supported systems, but performance may suffer in a production environment.
How to download and activate Studio 5000
Studio 5000 is licensed software, so you download it from Rockwell and activate it with a license. Follow these steps:
- Note the catalog number and firmware revision of your controller.
- Open the Product Compatibility and Download Center and find the compatible Logix Designer version.
- Download the installer and release notes for that version.
- Install the prerequisites, including FactoryTalk Activation Manager.
- Activate your license through FactoryTalk Activation.
- Update the controller firmware if the project requires it, and then download the project.
Do not use unofficial copies. They cannot be activated properly, and they put your control network at risk. Ask your Rockwell distributor about editions, pricing and evaluation options. Accredited schools can also join Rockwell’s Educational Support Program, which gives institutions and students lower-cost access to hardware, software and training tools.
Practical tips before you upgrade
- Back up every project before you open it in a newer version.
- Keep a small table of plant projects with their Logix Designer and firmware versions.
- Test the upgrade on a copy first, and use Logix Emulate when you have no spare controller.
- Install only the options you need, because extra tools add prerequisites.
- Read the application notes in the release notes, since they list known issues.
Interested in how Rockwell controllers talk to other systems? Read our Rockwell Automation OPC UA overview. You can also browse all Rockwell Automation downloads on our site.
Where to read the official requirements
Rockwell publishes full details in the Studio 5000 Logix Designer system requirements. Check that page before you buy a new laptop or plan a plant-wide upgrade.
