Home » OMRON NXR-S Safety I/O Block Puts CIP Safety Logic at the Machine

OMRON NXR-S Safety I/O Block Puts CIP Safety Logic at the Machine

365 views
OMRON NXR-S Simple Logic Safety I/O Block for CIP Safety with SmartClick M12 connectors

OMRON Automation Americas has introduced the NXR-S Series, a Simple Logic Safety I/O Block for CIP Safety™. It moves safety logic out to the point of action while keeping safety management centralized. For machine builders and end users, the result is a more uniform safety architecture across machines, with less effort spent on engineering, commissioning and maintenance.

Distributed logic, centralized management

Traditional remote safety I/O simply passes signals back to a central controller. The NXR-S works differently: it runs safety logic locally and stays under central CIP Safety supervision. Response times can be as low as 15 ms, and the IP67 housing lets the block sit right on the machine. Safety decisions happen closer to the hazard, which improves responsiveness, makes safety-distance calculations easier and lowers overall system complexity.

Faster, simpler installation

SmartClick M12 connectors carry power, Ethernet and I/O, and single-cable options cut wiring further. Each connector locks with a 1/8 turn, so installers don’t need torque-controlled tools, and installations are quicker and more repeatable.

Less safety programming effort

The block includes pre-defined, add-on and user-defined safety applications. These shorten commissioning and reduce the need for specialist safety programmers. Builders can use configurable local logic to roll out the same safety strategy across different machine designs.

Diagnostics without extra software

An embedded Web UI gives maintenance teams access to diagnostics, troubleshooting, status monitoring and device replacement, with no dedicated software required. The NXR-S can also talk to several CIP Safety originators at once, which allows more flexible architectures and fewer redundant devices.

Built for global deployment

The NXR-S addresses key international functional safety requirements, including IEC 61508, ISO 13849, UL/FSPC and CIP Safety conformance.

By combining local safety logic, central CIP Safety management, simple connectivity and built-in diagnostics in one IP67 device, the NXR-S offers a scalable way to design, deploy and maintain machine safety systems.

Related News