IMACS GmbH presents its control systems as an alternative and smart extension to the classic PLC at SPS in Nuremberg, from 24 to 26 November. The company targets machine and device builders that want less development effort, less extra hardware and a smaller footprint. Visitors can find IMACS together with MAKRO PCB in Hall 7, Booth 295.
Ready-made control systems instead of a full redesign
Each IMACS system combines control, application-specific inputs and outputs, communication and operation in one working unit. Machine builders can use these systems as they are. Alternatively, they can adapt hardware and software to their own requirements.
Functions for commissioning, operation and service are already built in. They include visualization, parameter setting, diagnostics, data logging, IoT communication and remote access. Customer-specific controllers are also based on existing hardware and software modules, so a complete new development is not necessary.
Direct sensor and actuator connection
Integrated sensor amplifiers, signal conditioning and power outputs are a key feature. Native sensors and actuators connect without extra signal converters, power drivers or the wiring they need. This reduces integration effort and allows compact control architectures.
- Sensors: temperature, pressure and flow, plus measurement of conductivity, pH, redox, vibration and strain (strain gauges).
- Actuators: valves, pumps, stepper motors and other loads can be driven directly.
Extending existing PLC systems
IMACS controllers work standalone, but they can also extend existing PLC systems. IMACS names Siemens, Beckhoff, IPC-based setups and Raspberry Pi as examples. The link runs, among others, over Modbus, OPC UA and MQTT.
A freely configurable, decentralized pre-processing stage (Sub-PLC) takes over application-specific control functions. It also processes sensor signals and prepares the data for the higher-level controller. At SPS, IMACS demonstrates this approach with the uniCUBE IoT compact controller.
Portfolio
- uniSYSTEMS: IP65 compact controllers.
- uniRAIL: modular DIN-rail controllers.
- Customer-specific hardware and software solutions.
According to IMACS, the systems are especially economical for machine and device builders with series of about 50 units or more.
Why it matters for machine builders
A standard PLC with separate signal converters, drivers and a panel adds hardware, wiring and engineering time. A pre-integrated system moves part of that work into proven building blocks. For small and medium series, this can shorten development. In addition, the Sub-PLC option lets teams add sensor-heavy functions to an existing control platform without replacing it.
Live demonstrations at SPS 2026
IMACS gives two short talks every day at its booth. At 11:00, a cost example compares classic PLC systems with uniSYSTEMS to reduce control and energy costs. At 14:00, a live demo shows how to configure a running controller in 15 minutes with proPLC.
The full IMACS SPS 2026 page lists the talk program and the registration for free tickets. You can find more on the IMACS website. For related news, read our PLC, PAC & Controller section and Renu Electronics at SPS 2026: HMIs, CODESYS Panels, Compact PLCs and FlexiIOs.
