PLC, PAC , Controller

Trio Motion Technology has introduced the initial controllers from its new Motion-PLC series, aimed at delivering enhanced motion control capability along with the ease of use of a PLC. The …

Murrelektronik’s MVK Fusion hybrid fieldbus modules combine three fundamental functions of installation technology: discrete I/O, safety I/O, and IO-Link. This smart 3-in-1 solution is gaining popularity globally, which is the …

Siemens S7-PLCSIM V20 Update 1 includes the following updates and improvements for simulating Siemens PLC programs with TIA Portal: Operating System Support S7-PLCSIM supports the same operating systems, virtualization, antivirus, …

This document outlines how to use the CODESYS SoftMotion Light library with a WAGO PFC to control a CiA 402- compliant drive over EtherCAT. SoftMotion Light supports single-axis, non-synchronized motion. …

The digitization of production methods introduces fresh challenges for the industrial automation sector. The Industrial Internet of Things presents significant chances to enhance efficiency and maximize the productivity of machinery …

This programming example shows how to configure and program a Bosch Rexroth ctrlX DRIVE servo controller with a Siemens S7-1200 controller via PROFINET communication. The documentation describes the PLC function …

The Weintek CODESYS SoftPLC platform is created for adaptability and enhanced capabilities, catering to the various integration requirements of contemporary industrial automation. With the growing implementation of Profinet in the …

Yaskawa has just announced the expansion of its SLIO remote I/O system with another NPN module. Following its introduction at SPS 2024, the 021-1BD80 module with ETS functionality is now …

Establish communication for data exchange of variables between a SIMATIC PLC and a Beckhoff TwinCAT3 PLC by using the SIMATIC ADS communication blocks “READ_ADS” and “WRITE_ADS”. READ_ADS and WRITE_ADS communication …

This manual covers general information on the basics to the application of the Mitsubishi PLC MELSEC iQ-F Series. The contents include explanations on the PLC, and explanations on the instructions …

The Migration Package offers support for fully updating a TIA Portal project from a SIMATIC S7-1200 to a SIMATIC S7-1200 G2. The Migration Tool is an Add-In for TIA Portal …

This section describes the basic step to connect devices with the Siemens PLC S7-1500 via Smart Communication Card using OPC UA. In this application note, data from UMC and CM-TCN.012 …

Kendrion is launching a new control set: the FIO Controller 111 and the Vico 04 HMI. This well-synchronized control combination harmonizes excellently and provides machine manufacturers with a practical solution …

When building an EtherNet/IP architecture, it will be organized as Scanner (master station) and Adapter (slave station). Each product communicates through I/O Connection or TAG Connection. The definition of its …

DIADesigner-AX supports exporting the user-defined variables to the XML file, and then DIAScreen imports the XML file to communicate between the controller and Delta HMI devices. The following takes AX-8 …